Making Office Desk Chairs

Author: sapoed | Categories: Chairs comments
Executive Office Desk Chairs

Office desk chairs – Making a chair seat sounds like a daunting task, but in reality it’s a simple job that only requires a few basic tools. A quick trip to a fabric store lets you put the rest of what you need, and soon you can get a brand new chair or series of chairs


Remove the old chair. Cut your material. Use the seat board as a template, cut foam about 1/4 inch (0.6 cm) larger than the seat around. Cut the wool 2 inches (5 cm) wider around and cut the fabric 4 inches (10 cm) wider around. If reuse the original padding, omit the new foam, but include the new wad to help the fabric lay softly over the finished office desk chairs. Stack material. On a clean floor, put the furniture cloth first (good downward), the batting next, the foam (if you use) after it, and put the board on top. Make sure that padding, seat on board, and batting is centered on the fabric.

Attach the lid to the seat. Stand on top of the office desk chairs, compress the foam. Find me in front of the seat, and then pull the fabric on that seat up and tight over the seat board. Staple the fabric to the board about 1 inch (2.5 cm) from the edge of the board. Turn around and find my chair back. Staple the fabric on the seat aboard that spot in the same way. Work from the middle and outwards, staple the rest of the front and back. Also work from the middle and outwards, attach the sides in the same way. Avoid stapling in the same place, which will make the corner bracket weaker and lumpier. Collaborate with fabric to try to make the corners as smooth as possible.


Comments are closed.